How to Store Anime Statues Safely When Space Runs Out

Quick answer

When space runs out, store statues in their original foam-lined boxes in a cool, dry room, and avoid tight plastic wrap. Pack each piece with foam or acid-free tissue, label the box, and check every few months. This prevents dust, warping, and accidental breaks.

Step-by-step storage process

1. Clean and dry the statue: Use a soft brush or microfiber cloth to remove dust, and ensure no moisture remains in crevices. Skip this and trapped dust can become abrasive during handling. Checkpoint: no visible dust or dampness before packing.
2. Disassemble removable parts: Separate bases, capes, weapons, and swap-out parts. Wrap each in acid-free tissue or foam, then place in labeled zip bags. A common mistake is leaving a heavy part attached, which can snap during storage. Checkpoint: every part is individually wrapped and labeled.
3. Line the box with foam: Use the original foam if available; otherwise, cut polyethylene foam to fit the box snugly. Never use newspaper or bubble wrap directly against painted surfaces. Checkpoint: statue cannot shift when you gently shake the closed box.
4. Place the statue and fill gaps: Put the largest piece in first, then smaller parts in a separate layer. Fill empty spaces with foam peanuts or crumpled acid-free paper to prevent movement. Overfilling can crack thin parts. Checkpoint: box closes without force, and contents feel firm but not compressed.
5. Seal, label, and store: Tape the box closed, label with contents and date, and store in a cool, dry room away from sunlight. Avoid stacking heavy boxes on top. Check stored statues every 3–6 months for dust or damage. Checkpoint: boxes are off the floor and not exposed to heat or moisture.

Statue specs that affect storage planning

• [Pre-Order] SIREN Studio - Statue - Yoo Sangah Omniscient Reader's Viewpoint: Standing: (H) 31cm; Sitting: (H) 29cm; Material: Resin PU + Metal Parts; Total Global Production Unit: Standing: 159. The two height options mean you need a box tall enough for the standing version, and metal parts should be wrapped separately to avoid scratching paint.
• [Pre-Order] Floating Light Studio - Statue - Light Luxury Standing Pose Series 001 Yato Noragami: (H) 40cm x (W) 30cm x (D) 21cm; Material: Resin, PU; Scale: 1/6. At 40cm tall, this statue requires a large storage box; measure shelf and box space before ordering to avoid repacking later.
• [Pre-Order Closed] Yumi Figure - Statue - The Legend of Zelda - Princess Zelda: Product Phase: Pre-Order Closed; Est. shipping cost: United States / Air(5-10days): $55USD; CANADA/AU / Air(5-10days): $60.5USD; EU / Air(5-10days): $49.5USD. If you are storing this statue after delivery, keep the shipping box and its inserts; they are designed to protect the statue during moves and long-term storage.