Hobby Sakura Eris Boreas Greyrat 1/7: Pre-Order Buying Guide
By MUMU JOYTOY SHOP | Anime Figures, GK Statues & Resin ... | Published: 2026-11-01
Category: Buying Guides
Decide whether the Hobby Sakura Eris Boreas Greyrat 1/7 PVC figure fits your shelf and budget, with clear rules on pre-order timing, scale, and shipping costs.
Quick answer
Buy the Hobby Sakura Eris Boreas Greyrat 1/7 if you want a licensed PVC figure of Eris at a mid-scale size and can budget for shipping quoted later. Skip it if you need a firm delivered price now or prefer a larger resin statue.
What the 1/7 scale means for your display
At roughly 25 cm tall, this Eris figure sits between smaller prize figures and large 1/4 or resin statues. That makes it easier to fit on a standard shelf or desk without a custom display case, but it still has enough presence to anchor a Mushoku Tensei corner.
If you already collect 1/7 figures, the height will feel familiar and consistent. If you mostly own 1/4 scale statues, expect this piece to look noticeably smaller beside them, so plan a separate shelf rather than mixing scales.
Why the pre-order price is not the final cost
The catalog price of USD 144.30 is a pre-order price, and the listing states that international and domestic shipping are not included. Shipping will be quoted once the product arrives at the logistics center.
That means your total cost stays open until closer to the April 2027 release. Budget a shipping buffer now rather than assuming the catalog price is all you will pay. The comparison price of USD 195.00 shows the discount at this stage, but it does not cover freight either.
Licensed PVC versus resin: what you give up
This is a licensed PVC and ABS figure, not a resin statue. PVC is lighter and generally more durable for handling, but it does not carry the same weight or often the same surface detail as resin GK pieces.
If your collection is built around resin statues, this figure may feel like a different tier. If you want an official Eris figure that is easy to display and less fragile, the PVC construction is the practical choice.
Decision rules for this pre-order
- Shelf space check: Measure the height and depth of your intended display spot. The figure is about 25 cm tall, so allow clearance for the base and any hair or pose extensions shown in the set. If you cannot give it at least 25 cm of vertical room, choose a smaller scale instead.
- Budget rule: Treat the USD 144.30 catalog price as the figure cost only. Set aside an additional amount for shipping, which will be quoted once the item reaches the logistics center. Do not pre-order if the shipping buffer would strain your budget before April 2027.
- Scale consistency rule: Buy this if your collection is mostly 1/7 or 1/6 scale. Pass if you mainly display 1/4 scale or large resin statues and want a uniform lineup. Mixed scales can work, but group this figure with similar-sized pieces for a cleaner display.
- Licensed versus resin rule: Choose this PVC figure if official licensing and easier handling matter more than resin weight and finish. Choose a resin statue if you want a heavier centerpiece and accept higher fragility. Decide which matters more before pre-ordering, because the materials serve different display goals.
- Release timing rule: The release is listed for April 2027. Only commit if you are comfortable waiting and can keep track of a shipping quote that arrives later. Set a reminder for early 2027 so the shipping invoice does not catch you off guard.
Product facts
- [Pre-Order] Hobby Sakura - PVC - Mushoku Tensei: Jobless Reincarnation III -Isekai Ittara Honki Dasu- Eris Boreas Greyrat 1/7 Complete Figure (Licensed): 1/7 scale, approximately 25 cm tall, made of PVC and ABS. The mid-size height fits standard shelves, but check your vertical clearance before ordering.
![[Pre-Order] Hobby Sakura - PVC - Mushoku Tensei: Jobless Reincarnation III -Isekai Ittara Honki Dasu- Eris Boreas Greyrat 1/7 Complete Figure (Licensed)](https://mumujoytoytg.com/api/image-optimizer?src=%2Fuploads%2Fsites%2F2236%2Fimport-1786870499359-608747258.jpg&w=1200&q=85)
[Pre-Order] Hobby Sakura - PVC - Mushoku Tensei: Jobless Reincarnation III -Isekai Ittara Honki Dasu- Eris Boreas Greyrat 1/7 Complete Figure (Licensed) - [Pre-Order] Hobby Sakura - PVC - Mushoku Tensei: Jobless Reincarnation III -Isekai Ittara Honki Dasu- Eris Boreas Greyrat 1/7 Complete Figure (Licensed): Pre-order with an April 2027 release and shipping quoted after arrival at the logistics center. You will not know the final delivered cost at checkout, so plan for a shipping charge later.
- [Pre-Order] Hobby Sakura - PVC - Mushoku Tensei: Jobless Reincarnation III -Isekai Ittara Honki Dasu- Eris Boreas Greyrat 1/7 Complete Figure (Licensed): Licensed Mushoku Tensei figure from Hobby Sakura with a total global production unit listed. Licensed status matters if you want an official Eris piece, and production limits can affect availability after release.
Who should pre-order this figure
Best for
- Collectors building a 1/7 scale Mushoku Tensei display
- Fans who want an officially licensed Eris figure rather than an unlicensed resin
- Buyers who can wait until the April 2027 release and budget for later shipping
Not for
- Collectors who need a final delivered price at checkout
- Display setups built around 1/4 scale or large resin statues
- Buyers who want a resin GK finish rather than PVC
![[Pre-Order] Hobby Sakura - PVC - Mushoku Tensei: Jobless Reincarnation III -Isekai Ittara Honki Dasu- Eris Boreas Greyrat 1/7 Complete Figure (Licensed)](https://mumujoytoytg.com/api/image-optimizer?src=%2Fuploads%2Fsites%2F2236%2Fimport-1786870499359-608747258.jpg&w=400&q=82)